Belt Conveyors | Features | Optional Heads

The EZ-Roll belt conveyor complements our line of chain and screw conveyors. This conveyor uses a system of spooled pulleys to act as troughing rollers for the belt. The belt is returned on a UHMW plastic bottom liner. An effective reloader is incorporated to bring spilled material back to the loaded side of the belt.

All bearings are external to the housing and are sized for extra long service life. The spool pulleys use easily removable stub shafts so that servicing clearances are kept to a minimum. Access doors are placed in the trough near the head and tail terminals. Each terminal has it’s own inspection door and the tail section includes a drop bottom cleanout.

The head pulley is lagged and the tail pulley is slatted. Both use tapered hubs for mounting. The tail takeup is 24" long to minimize re-splicing. We can provide self-contained drive packages. These usually use a shaft mounted reducer and belt drive.

Standard painted or optional galvanized construction is available. In addition to drives, other options include complete inlet assemblies, with or without gates, plug switches, bearing monitor provisions, belt alignment switches, tail shaft speed switch and made to order inlets and discharge transitions.

For many uses the EZ-ROLL Conveyor offers a low horsepower - low wear alternative. Its use is considered when the application requires:

•     LONG CONVEYING DISTANCES

•     HIGH CAPACITIES

•     CONSTANT RUNNING