EDI Control | Features and Benefits | Wiring

Features and Benefits
Schlagel’s EDI Controls require 110v 50/60 Hz control power and appropriate 3-phase motor power supplies. The controls offer a wide variety of features that enhance the operation of your distributor.

• Microprocessor-based intelligent control.
  
• Rapid, closest path positioning to any duct.
  
• Large 4 line fluorescent display.
  
• Tactile feedback keyboard.
  
• Keyboard-display unit may be placed at a remote location, up to 50 feet from control unit.
  
• Absolute spout positioning. Each duct is uniquely identified. No home synchronization is required.
  
• Remembers all distributor parameters incase of power loss; then verifies the spout position when power is restored.
  
• Single button access is available for up to six often used positions
  
• User programmable access numbers may be assigned to all positions. No cross reference charts necessary. 
• A user programmable name of up to eight characters may be assigned and displayed for each spout position.
• A one time, automated setup procedure allows the control to “LEARN” all parameters of the distributor, even correcting for reversed motor wiring. 
• Inexpensive 4-wire cable carries all position signals for each spout from any size distributor. This cable can be routed in a hazardous area without an enclosure.
  
• No mechanical adjustment of the distributor is necessary. 
• Torque limiting clutch prevents damage to the spout and drive in case of a jam from a foreign object.
  
• Motor enclosures are the only consideration when installing in hazardous environments.
  
• All electrical components including motor starter and thermal protection (but less disconnects) are included.
  
• Requires 110v 50/60 Hz control power and appropriate 3-phase motor power supplies.
  
• Two auxiliary outputs available with optional relay interface.
  
• Built-in error and diagnostic aids.
  
• Optional interfaces to PLCs and indicator lamps are available.