Standard Style Electrical Operator and Position Indicators
Gates that use a rack and pinion to control movement of the slide can be ordered with an electric drive to provide for remote operation. This is accomplished by a C-face motor, gear reducer and sprockets. A TEFC motor is standard with Class IIG as an option. Two Class IIG limit switches are standard and are set to indicate the fully open and fully closed position of the slide. Separate position indicators are optional for use on any manual, air, hydraulic or standard electrically-operated slide gate.
Consult the factory for more information on these.
Electric Linear Actuator
Slide gates that use a linear actuator are available both in an extended and compact style. Two limit switches (SPDT) are built into the actuator for setting the travel limits and to use with a remote indicator. A position indicator is also available as an option as well as operators for use in hazardous locations.
All of the different style gates are available with ball bearing rollers bolted to the channel frame. The standard rollers are on 3 1/2 inch centers under the inlet. Other sizes and styles of rollers, including cam followers, are available as an option. Shed plates are welded to the channel frame above the slide when larger rollers are used. These shed plates project toward the inside enough so that they cover the outermost point of the rollers. This does reduce the effective area of the gate opening and should be taken into account when necessary.
All the gates in this brochure are based on the most popular sizes and styles. We make a great variety of other sizes that are custom-built to your particular needs and requirements. All hole layouts are based on our standards and can be changed to meet your specifications. Round inlet plates, square to rounds and companion flanges are available to help fit these gates into your applications.
NEW PRODUCT OFFERING!
VGC GATE DRIVE
Variable position controller for electrically operated R&P gate.
Loadout Spouts and Kyaot Loudout Meter
Side bin attachments and hinged or fixed position spouts are available to match any style gate in order to make a complete truck or rail loadout system. These are available with or without lining. Various options to go along with the loadout are winches, telescoping sleeves and socks. The standard style for truck loadout is an hinged, straight spout with an open top. The standard style for rail loadout is a hinged spout with a turndown at the end and a closed top.
All of this can be factory integrated with the KYAOT valve loadout meter to help automate your loadout facilities.
NOTE: All prices and dimensions are subject to change without notice.
All of the different style gates are available with a top and bottom weather/dust cover. A top-mounted cover is recommended when the gate is exposed to outside weather conditions. A full bottom dust hopper can be ordered to prevent dust build-up or leakage.
Copyright © 2001-08, Schlagel, Inc., 491 North Emerson, Cambridge, MN 55008
Toll Free (800) 328-8002 ~ Local/International (763) 689-5991
FAX (763) 689-5310 ~ E-mail firstname.lastname@example.org